IsoTek V5 Titan High-Current Power Conditioner - Black

IsoTek V5 Titan High-Current Power Conditioner – Black

The IsoTek V5 Titan is a dedicated high-current mains power conditioner with three independently filtered Australian power outlets, designed for amplifiers, active loudspeakers, subwoofers and other demanding hi-fi or home theatre equipment. It combines low-impedance power delivery, substantial surge protection and a supplied 1.5m EVO3 Premier power cable.

Unlike a general-purpose multiway powerboard, the V5 Titan uses three separate high-current cleaning networks in a compact half-width chassis. Each outlet has its own filtering stage to help manage common-mode and differential-mode mains noise and reduce interference passed between connected components. For systems with larger power amplifiers or active speakers, it offers a purpose-designed way to organise mains power without giving up the flexibility of separate components.

Three Independent High-Current Outlets

Built for equipment with changing power demands

Three independently filtered outlets are intended for components such as stereo power amplifiers, active speakers and powered subwoofers. IsoTek specifies a combined output capacity of 16A or 3,680W at 230V, subject to the fitted Australian mains connection, installation and the connected equipment. The rating applies to the unit as a whole rather than to each outlet simultaneously.

For larger systems, check the combined consumption and the physical position of every component. A well-planned layout avoids cable strain and leaves clearance for the substantial connectors typically used on high-current equipment.

Advanced Noise Filtering

Separate networks to limit interference between components

IsoTek specifies RFI reduction of up to 85dB using its stated 50-ohm measurement standard, with filtering extending down to 5Hz. The V5 Titan uses a Direct-Coupled architecture and three cleaning networks intended to reduce both common-mode and differential-mode mains interference while maintaining a low-impedance current path.

These are electrical filtering specifications, not a guarantee of a particular audible result in every room. The benefit will depend on the connected equipment and the electrical conditions at the installation.

Surge Protection and Internal Construction

Protection and current delivery in one chassis

The Titan features an easy-reset RCBO protection system, a star-earthed network and IsoTek's KERP equal-resistance-path arrangement. IsoTek publishes an instantaneous surge-protection figure of 153,000A, with the product's design literature also describing a 75,000A continuous protection figure.

Internally, the unit uses silver-plated solid-core Ohno Continuous Cast copper with an FEP virtual-air dielectric arrangement. The design focuses on low-resistance electrical paths and managing noise without treating the three sockets as a single daisy-chained outlet bank.

Included EVO3 Premier Power Cable

A suitable mains lead is part of the package

The V5 Titan is supplied with a 1.5m IsoTek EVO3 Premier mains cable for the relevant Australian configuration. The Australian/New Zealand Premier specification uses three 2.5mm² silver-plated high-purity oxygen-free copper conductors, PVC insulation, cotton filler, paper wrap and a flexible PVC jacket. IsoTek specifies a 10mm outside diameter and gold-plated connector contacts for the Premier cable.

The Titan uses a 16A IEC C20 mains inlet, so the supplied lead must have the appropriate matching equipment-end connector and correctly rated Australian wall plug. Confirm the final cable termination and supply configuration before ordering. The unit and installation must operate within the rating of the weakest connector or circuit component.

System Link and Placement

Expansion for compatible IsoTek components

A dedicated IsoTek System Link outlet allows another compatible IsoTek unit to connect using a suitable System Link cable, maintaining a common star-earth reference. It is not a fourth general-purpose Australian power outlet.

At 220mm wide, 147mm high and 350mm deep, and weighing 12kg, the Titan requires a stable shelf with adequate ventilation and space for cabling. Allow room to access the rear panel and protection controls rather than enclosing it tightly behind other components.

Key Features

• Three independently filtered high-current Australian mains outlets
• Designed for suitable power amplifiers, active speakers, subwoofers and AV equipment
• 16A / 3,680W combined rated output at 230V, subject to local connector and circuit limits
• Published 85dB RFI reduction under IsoTek's measurement conditions
• 153,000A instantaneous surge-protection specification
• Easy-reset RCBO protection system and fully star-earthed network
• Silver-plated OCC copper internal wiring with FEP virtual-air dielectric
• Dedicated System Link connection for compatible IsoTek units
• Includes a 1.5m EVO3 Premier mains cable
• Black finish with compact half-width chassis

Specifications

Detailed Technical Specifications

For those who like to drag out all the useful bits

Important Notes

• The 16A rating is the combined V5 Titan capacity, not an allowance for each outlet independently.
• Australian circuit and fitted-plug ratings may reduce the permissible total load; confirm the complete installation requirements before use.
• The System Link output is for compatible IsoTek equipment and is not a fourth standard outlet.
• This listing is for the Black V5 Titan; the Silver model has its own TAE listing.
• Confirm current stock and the supplied Australian EVO3 Premier cable configuration before ordering.

The Audio Experts Take

The V5 Titan is a sensible consideration when a system includes high-current components that deserve a dedicated power-conditioning arrangement. Three separate high-current outlets give power amplifiers, active speakers or subwoofers their own filtering paths, with surge protection and System Link connectivity available for a more extensive IsoTek setup.

We would start with the equipment list and the room's electrical supply rather than choosing solely from the power rating. The Titan is a substantial 12kg component, and its C20 mains connection and cabinet clearance need to be planned properly. Contact The Audio Experts to discuss equipment compatibility, the Australian mains connection and a practical installation layout.