Description
AudioQuest FLX-X RCA Splitter 15cm (M22F / F22M)
The AudioQuest FLX-X is a short, passive RCA Y-splitter for compatible unbalanced analogue audio connections. Its 15cm flexible braided lead and solid Long-Grain Copper (LGC) conductors make it a practical way to adapt one RCA connection to two, with a choice of male-to-two-female or female-to-two-male terminations.
Choosing the correct plug arrangement matters more than the splitter's length. The M22F version plugs directly into an RCA socket and provides two female RCA sockets for existing cables. The F22M version accepts a male RCA plug and ends in two male RCA plugs, useful where an appropriate component has two RCA inputs.
Both versions are passive connection accessories. They duplicate the connection to a single analogue RCA signal; they do not provide amplification, make a mono signal into true stereo, or electrically isolate connected equipment.
Two Connector Configurations
Choose the version that fits the sockets and cables you already have
The FLX-X M22F has one male RCA plug and two female RCA sockets. It can connect directly to a suitable line-level RCA output where the system needs two separate RCA cables to receive the same signal. This is often the more useful arrangement when splitting a signal near an equipment output.
The FLX-X F22M has one female RCA socket and two male RCA plugs. It can be used at the end of an RCA interconnect to connect that one signal to a compatible pair of RCA inputs. For example, some powered subwoofers have left and right line-level inputs, although whether to feed both should be checked against the subwoofer manufacturer's instructions.
15cm Flexible Lead
More convenient than a rigid Y-adaptor in a crowded rack
The short braided section is approximately 15cm long. It provides a little movement between the RCA connector and the two branches, which can be useful behind equipment where adjacent sockets or cabinet walls make a rigid adaptor awkward.
The compact lead is intended for connection close to the components. Use suitable RCA interconnects for the rest of the cable run and leave enough room to avoid pulling or bending the equipment's socket.
Solid Long-Grain Copper Conductors
Straightforward, purpose-built analogue connectivity
AudioQuest specifies solid Long-Grain Copper (LGC) conductors and a braided cable covering. The important benefit in this application is a correctly terminated, flexible analogue connection rather than a claim that the splitter will improve the sound of the equipment by itself.
Practical System Compatibility
Check signal level and input requirements before splitting
Use these adaptors with appropriate analogue line-level RCA connections. Splitting one output between two inputs changes the load presented to the source, so check that both connected devices are suitable. The FLX-X is not a mixer, distribution amplifier or converter between different audio formats.
Do not connect two active outputs together through the splitter, and do not use an RCA splitter on speaker-level amplifier outputs. If you need an independently buffered signal for long cable runs or multiple devices, an active distribution solution may be more appropriate.
Available Connector Variants
Both variants use the same 15cm FLX-X cable construction and differ only in the plugs and sockets fitted. Select the configuration that matches your equipment.
| Variant | Connector layout | SKU | UPC |
|---|---|---|---|
| M22F | 1 Male RCA to 2 Female RCA | M22F-FLX-X | 092592042131 |
| F22M | 1 Female RCA to 2 Male RCA | F22M-FLX-X | 092592051096 |
Key Features
- Two connector configurations available on one product page
- 15cm flexible RCA Y-splitter for compatible analogue line-level connections
- Solid Long-Grain Copper (LGC) conductor construction
- Braided cable covering for a tidy, flexible short adaptor
- M22F: one male RCA to two female RCA connections
- F22M: one female RCA to two male RCA connections
- Supplied individually, not as a left/right stereo pair
- Passive accessory with no amplification or signal isolation
Specifications
| Specification | Details |
|---|---|
| Brand | AudioQuest |
| Range | FLX-X |
| Product | Passive RCA Y-splitter |
| Connector choice | M22F (1 male to 2 female) or F22M (1 female to 2 male) |
| Connection type | Unbalanced analogue RCA |
| Cable length | 15cm (6 inches) |
| Conductor | Solid Long-Grain Copper (LGC) |
| Jacket | Braided |
| Quantity | One splitter per order |
| M22F manufacturer SKU | M22F-FLX-X |
| F22M manufacturer SKU | F22M-FLX-X |
Detailed Technical Specifications
For those who like to drag out all the useful bits
View full technical specifications
Shared Construction
- Passive RCA Y connection for compatible analogue line-level use
- Approximate cable length: 15cm / 6 inches
- Solid Long-Grain Copper (LGC) conductors
- Flexible braided cable covering
- One splitter supplied per unit ordered
M22F Connector Variant
- Manufacturer part number: M22F-FLX-X
- Connection: 1 × male RCA to 2 × female RCA
- UPC: 092592042131
- Use where a male plug is needed at the single end and two female sockets are required at the branches
F22M Connector Variant
- Manufacturer part number: F22M-FLX-X
- Connection: 1 × female RCA to 2 × male RCA
- UPC: 092592051096
- Use where a female socket is needed at the single end and two male plugs are required at the branches
Important Notes
- Select the connector configuration carefully. M22F and F22M have opposite plug and socket arrangements.
- This is a passive one-to-two connection: it does not create separate stereo channels from a mono signal and does not amplify or buffer the signal.
- Do not join two amplifier outputs, two active line outputs or speaker-level outputs through this splitter.
- Where a powered subwoofer has two RCA inputs, check its manual before using the F22M variant; many subwoofers need only one LFE/mono connection.
- One splitter is supplied. Order two only if your system requires separate splitters for left and right channels.
- Contact The Audio Experts to confirm current availability and which termination will suit your equipment.
The Audio Experts Take
For a simple RCA connection job, the first thing we would check is the gender of the existing socket and cable. The M22F version is for a component socket that needs to feed two RCA cables. The F22M version is for an existing RCA cable that needs to plug into two suitable inputs, such as certain subwoofer arrangements.
We would use one of these splitters only where the source and connected equipment are intended to share a line-level signal. It is a neat short adaptor, not a substitute for an active distribution amplifier or proper system planning. If the connection arrangement is unclear, talk to The Audio Experts before ordering.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


