Atlas Ascent Metik 3.5mm–Ultra RCA S/PDIF Digital Cable

Atlas Ascent Metik 3.5mm–Ultra RCA S/PDIF Digital Cable

75-ohm-style coaxial digital interconnect for equipment using a 3.5mm digital output at one end and RCA S/PDIF input at the other, with OCC conductor and screened construction.

Atlas Ascent Metik 3.5mm–Ultra RCA S/PDIF Digital Cable is a digital cable designed around a specific connection job. The key is getting the correct connector format, length and signal type rather than using a physically similar cable for the wrong interface.

It suits DACs, portable digital sources or transports that expose coaxial S/PDIF through a 3.5mm socket and need to feed a conventional RCA digital input.

Connection and Compatibility

Choose the cable for the interface at both ends

3.5mm Metik digital plug to Ultra RCA; use only where the 3.5mm socket carries a compatible coaxial S/PDIF signal.

Cable Construction

Ground the recommendation in build and electrical design

Coaxial OCC-copper construction with foamed PEF dielectric and braid/foil screening is intended to maintain controlled electrical behaviour for S/PDIF transmission.

Installation and Length

Buy the length the system actually needs

It suits DACs, portable digital sources or transports that expose coaxial S/PDIF through a 3.5mm socket and need to feed a conventional RCA digital input. Avoid unnecessary excess length, but leave enough service slack to connect equipment without loading the plugs or sockets.

Connection and Installation

Choose Atlas Ascent Metik 3.5mm-Ultra around the actual connection standard and cable run. Connector shape alone is not enough to guarantee compatibility, particularly with 3.5mm digital sockets, DIN wiring, active HDMI and long concealed runs.

Key Features

• 3.5mm Metik digital plug to Ultra RCA; use only where the 3.5mm socket carries a compatible coaxial S/PDIF signal.
• Coaxial OCC-copper construction with foamed PEF dielectric and braid/foil screening is intended to maintain controlled electrical behaviour for S/PDIF transmission.
• Multiple lengths available in current Shopify variants
• Choose the exact termination required by both connected components

Specifications

Detailed Technical Specifications

For those who like to drag out all the useful bits

Important Notes

• A 3.5mm socket can be analogue or digital; confirm the source socket is specifically a coaxial S/PDIF output.

The Audio Experts Take

This Ascent Metik cable is for a specific digital connection: a 3.5mm S/PDIF output into an RCA coaxial digital input. Confirm that the 3.5mm socket on your source really carries S/PDIF, because a normal analogue headphone output uses the same physical size but is electrically different. Once compatibility is confirmed, choose the shortest practical length for the installation.