SAVE $$$ ON SELECTED AUDIO PRODUCTS & MORE!

Anthem Statement P2 Power Amp
Anthem Statement P2 Power Amp

Anthem Statement P2 Power Amp

Vendor

Anthem

Type

Power Amplifier

This product is available.
Quantity must be 1 or more
Regular price
$5,999.00
Sale price
$5,999.00

Anthem Statement P2


2-channel power amplifier with 325 watts per channel continuous power into 8 ohms


TheAnthem Statement P2 Power Amplifier is a quietest mono-block amplifiers in the industry. Each amplifier channel features two separate and autonomous power supplies fed from separate transformer windings. The amplifiers are thus able to deliver stable, continuous power at maximum output, regardless of the number of channels being driven.


Anthem Statement P2 Features



  • multi-layered, hand-designed circuit boards with thick copper traces

  • rugged, independent power supplies with tuned toroidal power transformers for each amplifier channel

  • fourteen rugged bipolar output devices per channel

  • custom-designed convection-cooled heatsinks with serrated fins;

  • a "no-fuse" design strategy

  • 2 channel amplifier

  • 325w x 2 @ 8 ohms

  • XLR and RCA inputs

  • Each amplifier is mono design with separate power supply and transformer

  • 2 ohm capable

  • THD 0.0007%

  • 14 bipolar output devices per channel

  • No fuse design

  • 3 on/off modes - auto/manual / trigger

    General



    • Inputs 2 Single-Ended, 2 Balanced, 1 Relay Trigger (3.5 mm Mono Jack)

    • Outputs 2 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5 mm Mono Jack)


    Switches

    • Front Panel Power (On/Off)

    • Rear Panel On/Off Modes (Trigger, Manual, Auto), Inputs (RCA, XLR, XLR -6dB)


    Power Output

    • Continuous RMS, 20 Hz - 20 kHz, <1.0% THD

    • 8 Ohms: 1 = 325W, All = 325W (# of Channels Driven)

    • 4 Ohms: 1 = 500W, All = 500W (# of Channels Driven)

    • 2 Ohms: 1 = 675W, All = 675W (# of Channels Driven)


    Specifications



    • Power Bandwidth: 10 Hz to 150 kHz (+0 -3 dB, 325 W into 8ohms)

    • Frequency Response: 20 Hz - 20 kHz (+0 -0.15 dB); 5 Hz - 100 kHz (+0 -2 dB)

    • THD + N (225 W into 8ohms): 0.0007% at 1 kHz, 0.008% at 20 kHz

    • IMD: 0.00019% (CCIF, 325 W into 8ohms)

    • INPUT SENSITIVITY (RCA and XLR 0 dB inputs): 1 Vrms in for 28.3 Vrms out (100 W into 8ohms)

    • Input Impedance: 18 k Ohms (RCA); 22 k Ohms (XLR)

    • Damping Factor: >600 at 20 Hz, 400 at 1 kHz (ref. 8ohms)

    • S/N Ratio: 125 dB, A-weighted (ref. 325 W)

    • Crosstalk (between any two channels): -140 dB (20 Hz), -80 dB (20 kHz)

    • Voltage Gain: 29 db

    • Slew Rate: 40 v/µs

    • Power Requirement: 105 to 130 V, 60 Hz ; 2 x 1800 W Power consumption

    • Dimensions (H x W x D; heights include feet, depth including handles): 23.8 cm x 49 cm x 57.2 cm

    • Net Weight : 34 kg





Reviews


"From what I have heard, the outputs can be shorted and it still won't shut down (one of my writers took the challenge, and it remained on and ready to rock & roll. The P2 also sounds very good, and of course, this is the most important thing about any amplifier. In any case, if you have speakers that dip into the low range of impedance and are not very sensitive, the P2 would be an excellent solution."—John Johnson

Review - Secrets of Home Theater

For more information, please visit -

Anthem Audio P2(doc)

Anthem Audio P2(pdf)